Focusing On Retractable Running Boards 20 Years

Chengdu Yongtuo Pioneer Technology co. LTD

Installation Manual for Ford Ranger

Source: Updates Author: YTPIONEER SVisit: 1674

 APPLICATION                                           YEAR

Install ECU, OBD and wiring 

Install bracket (right side, 2 sides in same way to install) 

Install running board (2 sides in same way to install)

1.2 Use M6 × 25 screw and spring washers to fix running board with brackets

1.Insert fuse again. Then open and close  doors to let step work. To assure them up  and down freely to adjust position by itself.

2.If still not balance, use U shape washer to adjust it.

Checking all doors activate, the side step work when doors open and close
Now the installation is finished.

To lift the car as  showed                                                                           To lift the car

 To changing tire

Automatic power deploy:

The running boards will extend down and out when the door is opened.

Automatic stop:

If an object is in the way of the moving running board, the running board will automatically stop. To reset, clear any obstruction, then simply open and close the door to resume normal operation.

Manually set in the deployed (OUT) position for access to the roof:

Step your foot while at the same time closing the door. To resume normal operation,open and close the door.

Maintenance:

In adverse conditions, debris such as mud, dirt, and salt may become trapped in the running board mechanism, possibly leading to unwanted noise. If this occurs, manually set the running boards to avoid spraying the motors directly. After washing,apply silicone spray lubricant to the hinge pivot pins.