Chengdu Yongtuo Pioneer Technology co. LTD
Cellphone / Wechat / Whatsapp / Skype:+008618161185378
Installation Manual for Toyota Fortuner
Toyota fortuner 2015+
Install ECU, OBD and wiring
Install left side bracket (The left and right methods are the same)
1、2 position use M8*35 T shape screws and relative nuts and pads.
Use T- shape M10 × 45 screw to fix
Use T-shape M8 × 45 screw to fix
Install running board (2 sides are with same way)
1，2 Use T- shape M10 × 45 screw to fix
3 Use T-shape M8 × 45 screw to fix
4，5 Use T- shape M10 × 45 screw to fix
6 Use T-shape M8 × 45 screw to fix
Testing and adjust the balance
Insert fuse again. Then open and close doors to let step work. To assure them up and down freely to adjust position by itself.
Checking all doors activate, the side step work when doors open and close Now the installation is finished.
To lift the car as showed To lift the car
To changing tire
Automatic power deploy:
The running boards will extend down and out when the door is opened.
If an object is in the way of the moving running board, the running board will automatically stop. To reset, clear any obstruction, then simply open and close the door to resume normal operation.
Manually set in the deployed (OUT) position for access to the roof:
Step your foot while at the same time closing the door. To resume normal operation, open and close the door.
In adverse conditions, debris such as mud, dirt, and salt may become trapped in the running board mechanism, possibly leading to unwanted noise. If this occurs, manually set the running boards to avoid spraying the motors directly. After washing, apply silicone spray lubricant to the hinge pivot pins.
Please click on the installation manual to download and view: